Recommended DDR3 Graphics Cards

MSI Gaming GeForce GT 710 2GB

MSI Gaming GeForce GT 710 is a low-budget graphic card commonly used to play older games and perform various tasks, but It’s still a powerful card nonetheless. It is one of the cheapest powerful cards out there right now. This can be found for $70 on Amazon or even more affordable on other websites.

It has a dedicated 2048MB DDR3 VRAM and a well-functioning 64-bit memory interface, It is a low-profile design that uses quiet fans, but they can be noisy when working with heavy loads or newer games. Its core clock can reach speeds of up to 954MHz.

It’s comparatively minor and straightforward to install but sometimes works well with some systems. Some users faced difficulty installing it on Windows 10.

This best ddr3 GPU supports several display options, providing a dual-link DVI-D, D-Sub, and HDMI port. It’s also relatively compact and can fit easily in more minor cases. Its dimensions are 22.86 CM x 15.24 CM x 5.08 CM x 9 inches x 6 inches x 2 inches.

OUR VERDICT

The MSI Gaming GeForce GT 710 is overall a fantastic card. Even though It’s a bit outdated, It’s still pretty powerful and can run games like Grand Theft Auto V, Saints Row III, Watchdogs II, Apex Legends, and Fortnite at lowered settings.

ZOTAC GeForce GT 730 Zone Edition 4GB DDR3

NVIDIA’s GeForce GT 730 is a pretty outdated card, released in 2014. In terms of DDR3 cards, it is among the list of best cards. GeForce GT 730 was made on the base of NVIDIA’s Kepler architecture. Although it cannot be compared to the Maxwell or Pascal architecture, it’s a lot for a DDR3 card.

Talking about the specs of this GPU, Zotac GeForce GT 730 supports 4 GB of GDDR5 memory VRAM connected with a memory bus of 128 bits, its memory clock is about 533 MHz, and its base clock is about 700 MHz.

This best gddr3 GPU doesn’t require much power so you can use it on a regular 200W power supply. Three display outputs are available on the card, including 1x HDMI 1.3a, 1x DVI, and 1x VGA.

OUR VERDICT

NVIDIA GeForce GT 730 is a simple, low profile, and pocket-friendly card for some low-med settings gaming and simple rendering. We prefer this card if your work is too powerful, requiring, or over-efficient.

MSI Geforce 210 DDR3

MSI GeForce GT 210 is the last card released by MSI in their GT 200 series. It is a single-slot, low-profile card. It’s relatively better than similar cards of his kind in terms of performance. Although It may seem pricey for a card, the efficiency and performance boost evens the deal.

Its GPU configuration comprises 16 SPs, 4 ROPs, and 8 TMUs. It uses a broader heatsink to deal with any cooling issues. The clocks for the core are 589MHz. For shaders, It’s 1402MHz, and 500MHz for the RAM. It comes with 27% memory bandwidth, a shader power of 30%, and an ROP and texture power is 50%.

When all of these are running altogether, It only uses 30-32W under full utilization and 7W when it is not being used (idling).

It is the best choice for people that fall way under the budget line and want the cheapest video card to game with, It often may not run the games smoothly, but with lowered and adjusted settings, It can run the games with decent FPS. It has a DVI and HDMI port that can support multiple monitors simultaneously.

OUR VERDICT

MSI GeForce GT 210 is the budget card to go with if you’re looking for a cheap card because It’s as most affordable they get without compromising much with the power efficiency, performance, and cooling.

Nvidia Quadro NVS 510 2GB DDR3

NVIDIA Quadro NVS 510 is built on NVIDIA’s Kepler architecture. The card was released in 2012. Although Quadro NVS 510 is outdated, it was a high-end beast in its time.

The card is based on a GK107 graphics processor, a chip of about 118 sq mm. The card possesses 2048 MB of DDR3 memory connected through a memory bus of 128 bits. The card’s memory clock is 891 MHz and operates at a frequency of about 790 MHz.

Quadro NVS 510 is a less power-consuming card, so it does not need any power connecter, and you can use 200W PSU for this card. The display outputs available on cards are 4x DisplayPort 1.2.

OUR VERDICT

We suggest you pick NVIDIA Quadro NVS 510 if you want something for rendering because NVIDIA launched the Quadro series to provide power-efficient cards to content creators.

You can play some games, but it is not worth gaming, anyways the card is a pretty low profile. You can arrange it in any case. Overall the card is the best to pick for editing.

EVGA GeForce GT 630 GDDR3

EVGA GeForce GT 630 utilizes the trustworthy and reliable Fermi architecture that enables the card to run smoothly. It includes most of the modern features and It’s a pretty advanced card, It also supports the newer PCIe 2.0 bus architecture.

The card does not compromise on bandwidth usage and can even run modern designed and bandwidth-requiring games.

The Fermi architecture is also mounted with state-of-art features like the PhysX technology that enhances your gaming experience by maintaining a realistic and dynamic experience and CUDA technology that’s used for dealing with heavy loads and demanding tasks, It can even support ray-tracing which mostly only most advanced cards do.

It uses DDR3 memory as mentioned in the name and is pretty effective in handling hefty loads. It has support for the new DirectX 11 which works efficiently with it.

This GPU also supports a multi-display option so you can have a setup containing multiple monitors. It also has support for HDMI. Its clock speeds are 810MHz for graphics and 1620MHz for processors.

OUR VERDICT

EVGA GeForce GT 630 is an advanced card for only a small price tag of around 80$ while being comparatively cheaper, It still packs a punch and runs modern games without much hassle and even supports real-time ray-tracing for an amazing gaming experience.